Gas RC Cars
BU: How to Established up a Gyro on Your rc car Working with the Hobbyking HK401B Gyro
As requested by a couple of guys on my channel here is a how-to on setting up a flying gyro on your rc car. I use the HobbyKing HK401B but the information almost certainly performs for all gyros like it. Make sure you get a gyro that is ACVS or ACVS & Headlock not one particular that is Headlock only. Headlock gyros do not perform on rc cars. Permit me know if you require any a lot more assistance in the feedback or message me by using my channel get hold of facts or on RCSpeedRunHub.com.
You can get the gyro I use in this article at HobbyKing.com:
Many thanks for viewing and don’t forgot to like, remark and subscribe!
Stop by Us at:
Visit us on Facebook:
Stop by Us on Instagram:
Check out some of my songs on Soundcloud:
I make all of the new music in my videos. If you are fascinated in obtaining some custom theme music enable me know!
when the gyro is set to high cars wobble ..
Just returned my fkysky gt3b
I understand this video is 5yo and trust you no longer use any rigid plastic ties to security your Gyro to the chassis as this induces/propagates the road vibrations through it and effects the gyro's (sensitiviy noise). If you do not trust the double sided tape, use an elastic band instead, but do not over tighten it… Just snug enough to hold it from "flying" away at high speed, i.e. do not pin it downtime against the frame. Using good quality 3M double sided tape should be more than enough, assume your shock absorbers setup is good and the Gyro is protect against accidental knocks. Using a lighter car specific gyro could help the Gyro inertia if that is your main concern, but these are very light when comparision with the adhesion force of a good tape. I would even recommended using a thicker double sided foam tape to reduce the vivrations even more.
My fs-gt3c got reseted and i had no idea how to set up this gyro ! Hopefully your vid is easy to find. Thanks again
My servo gets very hot with these instructions? Any suggestions
My Gyro cuts my steering completely out in one direction if I hit a bump is this normal?
You should do an updated vid with the SKYRC GC301 Mini Gyro 🙂
By the way its discontinued
Build battery trays….please!!
First receiver I've seen were the negative in on the inside
Will it work if the car drives uphill on rough terrain?
Can this Gyro be used on a traxxas 2wd slash?
how would this work with dx4c dont have epa
Well explained for someone new to the hobby. Thank you very much
How to turn on the headlock…?
i know this guy at first i thought i knew but now i definitly do
Hello, can this gyro fully compatiable works with flysky fs-gt3b? And i have not many information about these topics, i have 2 channel transmitter and 3 channel receiver, can i use this gyro with out i do not buy a 3 channel transmitter? (Only connecting with my 3 ch receiver? If it works, i do not buy fs-gt3b) Thanks for your answers
Good video, just DON"T use a ZIP tie. Double sided foam tape is good. Reduces the vibration transmitted to the Gryo.
"make sure your servo wires are, white to white, black to black" Oh god, another guy in love with his own voice.. this is literally a five minute video.. "make sure your gyro doesn't move"
Is this for rc drifting
don't know if it's set right or not but my son car flipped first 30 feet
I have a digital high torque servo so turn it on digital
im having a problem with my gyro ~ the same one in this video ~ the heading hold will not turn completely off ~ im using the futaba 4pls, Savox sc1267SG Digital Servo ~ on the transmitter my setting options are Normal, AVCS & SEL witch i get to thru my Gyro Mix option ~ im using Normal & the heading hold light goes off temporarily ~ im lucky i was just out testing my car cause it came on in the middle of my test run & the car turn right outta nowhere & i almost hit the curve hard ~ i have no idea how to fix it ~ i really need your help….
thank you once again I finally connected my HK gyro to my slash 2wd using your video as a guide ! time to bash!
Great video, thanks for sharing. One thing: The documentation for the HK401B says: "Use double sided foam tape and never use cable ties. " Just wondering why you stressed cable ties so much in the video?
Whats is headlock
does it matter what receiver you use to be able to get good range
Awesome )O_-(
can anyone help me with the HobbyKing gyro red light just blinks nothing else happen
how to turn off the head lock light the red one please help and how to set up
thank you, just ordered one for my 2wd slash!
Thanks.. I think this is an awesome video who explain everything we need to understand and I have put a link in the great Traxxas Forum, to help keeping the wheel's running.
whats the Name oft the transmitter
What if my remote doesnt have a screen?
What do I use for a basher?
I use a Quanum Vandal and a Towerpro servo.
My throttle does not work , what I m doing wrong ???
how does it work on a spektrum dx4c
just set one up on my BZ-222 2WD buggy with bald tires, it actually goes in a strait line now from a dig. before would just spin out. So cool.
Awesome vid man, I fly helicopters and have a couple of these HK gyros in the junk box. Def gonna try this in my 2WD Slash, it needs some help.
don't have any steering has well
can't seem to get that headlock from flashing red, can any1 help?
Hi I would like to mount a camera on top of the gyro, to make it look where the car is drifting into, how could I make that work?
all I'm seeing on the receiver is auxiliary one am two. throttle, steering, bonding
it's blinking
I have a Spektrum DX4s